Relación entre el seno maxilar y ápices de dientes postero- superiores con tomografía computarizada de haz cónico / Relationship between the maxillary sinus and apices of posterior-superior teeth using cone beam computed tomography

El conocimiento de la relación entre el seno maxilar y los ápices de los dientes posterosuperiores es fundamental para evitar complicaciones frente a distintos tratamientos. Estudio descriptivo de corte transversal, con muestra por conveniencia de 383 imágenes de raíces de dientes posterosuperiores obtenidas por medio de tomografía computarizada de haz cónico (TCHC) de un centro radiológico en Viña del Mar, Chile. Cada raíz fue clasificada según su relación vertical con el seno en 4 categorías (0: ápice no se encuentra en contacto con contorno inferior del seno; 1: ápice en contacto con seno; 2: ápice lateralmente al seno; 3: ápice se protruye en seno). Además se midió su distancia en mm. Los datos fueron analizados con estadística descriptivas. El diente más lejano al seno maxilar fue el primer premolar superior (4.2 mm), seguido por el segundo premolar superior (1 mm). En el primer molar superior la raíz más lejana fue la mesio-vestibular (MV) 1mm, seguida por la raíz disto-vestibular (DV) 0.6mm y la raíz palatina (P) -1mm. En el segundo molar superior la raíz más lejana fue P 0.4mm, luego la DV 0.3mm, y MV -0,11mm. En cuanto a las categorías, se observó que la mayoría de las raíces se encuentran alejadas del seno siendo la raíz P del primer molar superior y la raíz MV del segundo molar superior las que se encuentran mayormente protruidas (42 % y 26 % respectivamente). El primer premolar es el diente posterosuperior que se encuentra más alejado del seno maxilar y a medida que se avanza hacia posterior hay tendencia a disminuir la distancia entre los ápices y el seno maxilar.

SUMMARY: Knowledge of the relationship between the maxillary sinus and the apices of the upper posterior teeth is crucial to avoid complications when considering different treatments. A descriptive cross-sectional study was carried out, with a convenience sample of 383 images of upper posterior teeth roots, obtained by means of cone beam computed tomography (CBCT) from a radiological center in Viña del Mar, Chile. Each root was classified according to its vertical relationship with the sinus into 4 categories (0: apex is not in contact with the lower contour of the sinus; 1: apex is in contact with the sinus; 2: apex laterally to the sinus; 3: apex protrudes in sinus). In addition, its distance was measured in mm. The data were analyzed with descriptive statistics. The tooth farthest from the maxillary sinus was the maxillary first premolar (4.2 mm), followed by the maxillary second premolar (1 mm). In the upper first molar, the most distant root was the mesiobuccal (MV) 1mm, followed by the distobuccal root (DV) 0.6mm and the palatal root (P) -1mm. In the upper second molar, the furthest root was P 0.4mm, then DV 0.3mm, and MV -0.11mm. In reference to the categories, it was observed that most of the roots are far from the sinus, with the P root of the first upper molar and the MV root of the second upper molar being the most protruding (42 % and 26 % respectively). The first premolar is the posterior maxillary tooth that is furthest from the maxillary sinus and as one advances posteriorly there is a tendency to decrease the distance between the apices and the maxillary sinus.

Accuracy of Root ZXII, E-PEX and FIND apex locators in teeth with vital pulp: an in vivo study

Abstract: This research evaluated, in vivo, the accuracy of three electronic apex locators - EALs (Root ZXII, E-PEX and FIND) in teeth with vital pulp submitted to biopulpectomy, preserving the periodontal stump. For this study, 90 single-rooted teeth with extraction indication were selected. After positive pulpal cold sensitivity test, pulp chamber access was performed. The cervical and middle thirds of root canals were instrumented with Reciproc R25, and the K#15 file was used as a standard instrument to determine working length, forming 2 groups: Constriction (insertion of the instrument until the apical constriction limit) and Foramen (insertion of the instrument until the foramen and then repositioning at constriction, without removing the file from the canal). The hand file was stabilized with a light-cured flow resin. After extraction, the samples were analyzed through microCT SkyScan 1272, with CTAN software, which evaluated the proximity between the tip of the file to the apical constriction, providing data for comparative analysis using Kruskal-Wallis and Dunn tests (p<0.05). There was a statistically significant difference in the abilities of the EALs to detect the apical constriction after reaching the foramen with Root ZX II showing higher accuracy (89%). However, there was no difference in the accuracy of the three EALs in detecting the apical constriction without reaching the foramen. Based on the present results, we conclude that EALs may show accurate measures in detecting apical constriction and foramen, even without damaging the periodontal stump in biopulpectomy.

Micro-computed tomographic analysis of apical foramen enlargement of mature teeth: a cadaveric study / Análisis mediante micro-CT del ensanchamiento del foramen apical de dientes maduros: un estudio cadavérico

Revitalization procedures have been extensively studied during the last decade and offers several advantages over root canal treatment, such as the recovery of the natural immune system. Mature teeth have a small apical foramen diameter (AFD), which could impair the ingrowth of tissue into the root canal. We analysed three methods for apical foramen enlargement by instrumentation in in situ human teeth and evaluated the damage over hard tissues produced by the techniques. Tooth length (TL), defined as the length from the most coronal part of the crown to the point at which the file abandons the root canal, was calculated. Forty-four in situ teeth were randomized: Group I: instrumentation 0.5 mm coronal to TL; Group II: at TL level; Group III: 0.5 mm beyond TL. Teeth were instrumented up to K-file #80. The mandibles were scanned in a micro-CT device before and after treatment. Group I: Only 20 % of teeth presented an enlarged AFD, with augmentation of 0.09 mm. No damage to hard tissues was observed. Group II: 71.4 % of the teeth presented an enlarged AFD with augmentation of 0.42 mm. 35.7 % presented damage to periapical tissues. Group III: 86.7 % presented an enlarged AFD with augmentation of 0.43 mm. 46.7 % presented damage to periapical tissues. All groups presented similar prevalence of teeth with dentine thickness less than 1mm. All mandibular incisors presented areas of thickness less than 1mm. Instrumentation 0.5 mm beyond TL is the most effective technique.

La revitalización de dientes necróticos ha sido ampliamente estudiada durante la última década y ofrece varias ventajas sobre la endodoncia convencional, tal como la recuperación del sistema inmunitario natural del diente. Los dientes maduros tienen un diámetro de foramen apical (FA) pequeño, lo que podría afectar el crecimiento de tejido en el conducto. Se evaluaron tres métodos para la ampliación del foramen apical en dientes humanos in situ y se evaluó el daño sobre los tejidos duros producidos por las técnicas. Mediante radiografía periapical se calculó la longitud del diente (TL), definida como la longitud desde la parte más coronal de la corona hasta el punto en que la lima abandonó el conducto radicular. En el estudio fueron aleatorizados 44 dientes in situ: Grupo I: instrumentación 0,5 mm coronal a TL; Grupo II: a nivel TL; Grupo III: 0,5 mm más allá de TL. Los dientes fueron instrumentados hasta la lima K #80. Las mandíbulas se escanearon en un dispositivo de microCT antes y después del tratamiento. Grupo I: solo el 20 % de los dientes presentaron un diámetro de FA ensanchado, con un aumento de 0,09 mm. No se observó daño a los tejidos duros. Grupo II: el 71,4 % de los dientes presentaban un FA ensanchado con un aumento de 0,42 mm. El 35,7 % presentó daño a los tejidos periapicales. Grupo III: el 86,7 % presentó un FA ensanchado con un aumento de 0,43 mm. El 46,7 % presentó daño a los tejidos periapicales. Todos los grupos presentaron una prevalencia similar de dientes con un espesor de dentina inferior a 1mm. Todos los incisivos mandibulares presentaban áreas de grosor inferior a 1mm. La instrumentación 0,5 mm más allá de TL es la técnica más efectiva, aunque se debe tener especial consideración en aspectos como el debilitamiento de la estructura dentaria.

Estudio de la precisión de un localizador de ápice electrónico en dientes monorradiculares / Assessment the accuracy of electronic apex locater in single canal teeth

Introducción: La correcta determinación de la longitud de trabajo es uno de los principales factores determinantes para el éxito de los tratamientos endodónticos. Objetivo: valorar si es precisa la determinación de la longitud de trabajo de un localizador de ápice electrónico en dientes monorradiculares. Métodos: se realizó un estudio experimental exploratorio in vivo, donde se determinó la longitud de trabajo en 141 conductos monorradiculares en pacientes con indicación de exodoncia. Se determinó la longitud de trabajo con un localizador de ápice electrónico iPex II(NSK). Cuando el localizador marcó que la lima se encontraba en el ápice, sin retirar el instrumento del conducto se procedió a fijarla. Se realizó la extracción con precaución y, posteriormente, se desgastó una pared proximal del tercio apical hasta que se pudo observar la lima en el interior del conducto, con auxilio de una lupa. La longitud de trabajo fue aceptable cuando el localizador determinó que estaba entre 0,5-1,5 mm del límite cemento-dentina-conducto; corto cuando estaba a más de 1,5 mm y largo cuando se observó que sobrepasaba el límite cemento-dentina-conducto. Resultados: fue aceptable la precisión en 135 (95,7 por ciento) mediciones y solo 13 (9,2 por ciento) conductos tuvieron inestabilidad, con una relación existente entre la precisión y la inestabilidad de las mediciones. Se observó que 88 (62,4 por ciento) conductos con secreciones obtuvieron un aceptable en la determinación de la longitud de trabajo, mientras que solo 3 (2,1 por ciento) conductos con secreciones tuvieron mediciones cortas. La presencia de secreciones no fue significativa para evaluar la precisión. Conclusiones: Las mediciones de las longitudes de trabajo empleando el localizador estudiado fueron mayormente de precisión aceptable y no inestables. Del mismo modo, la presencia de secreciones en el interior de los conductos radiculares no afectó significativamente la precisión del localizador en cuestión(AU)

Introduction: The correct determination of working length is one of the main determining factors for the success of endodontic treatments. Objective: to assess the accuracy when determining the working length of an electronic apex locator. Objective: To assess the accuracy of the determination of the working length of an electronic apex locator in monoradicular teeth. Material and methods: An exploratory experimental study was carried out in vivo where the working length was taken in 141 monoradicular root canals of patients with indication of extraction. Working length was determined using iPex II electronic apex locator (NSK). When the locator marked that the file was at the apex, without removing the instrument from the duct, it was fixed. The extraction was performed with caution and subsequently a proximal wall of the apical third was worn down until the file was observed inside the duct, observed and studied with the help of a magnifying glass. The working length was acceptable when the locator determined that it was between 0.5-1.5 mm of the cement-dentin-duct limit; short when it was more than 1.5 mm and long when it was observed that it exceeded the cement-dentine-duct limit. Results: The accuracy of 95.7 percent (135) of the measurements was acceptable and only 13(9.2 percent) ducts had instability, with an existing relationship between the accuracy and instability of the measurements. It was observed that 88(62.4 percent) ducts with secretions obtained an acceptable one in the determination of the length of work. Only 3 (2.1 percent) ducts with secretions had short measurements. The presence of secretions was not significant to assess the accuracy. Conclusions: The measurements of the working lengths using the locator studied were, almost entirely, of acceptable precision and were practically unstable. Similarly, the presence of secretions inside the root canals did not significantly affect the accuracy of the localizer in question(AU)

Micro-computed tomographic assessment of the variability and morphological features of root canal system and their ramifications

Abstract Objectives This study assessed the incidence and variability features of root canals system (RCS) and their ramifications according to Pucci & Reig (PR) (1944) and the American Association of Endodontists (AAE) (2017) by micro-computed tomography (μCT). Methodology 500 representative extracted human teeth of each tooth group (n=50) (maxillary/mandibular central and lateral incisors, canines, first and second premolars and molars) were scanned by μCT with a resolution of 26.70 μm. The reconstructed cross-sections images and the visualization of the continuous slices in the transversal axis were performed using DataViewer software. RCS were classified according to Pucci & Reig (main canal, collateral canal, lateral canal, secondary canal, accessory canal, intercanal, recurrent canal) and AAE (main canal, accessory canal, lateral canal). The apical deltas were assessed for both classifications. The prevalence of apical deltas was evaluated using the Chi-squared test (p<0.05). Results According to PR, a higher incidence of lateral canals was observed in maxillary canines (10%), central incisors (8%) and first premolars (6%). Using AAE, the highest incidence of lateral canals was observed in the mandibular first premolars (85%), first and second molars (84%), lateral incisors (67%), canines (59%), and in maxillary first premolars (52%). Regarding accessory canals, the PR showed a frequency in 2% of the maxillary lateral incisors and maxillary and mandibular first premolars and 3% of mandibular first and second molars. On the other hand, the AAE showed the highest incidence of accessory canals in 86% of the maxillary first premolars, 71% in mandibular lateral incisors, 69% in mandibular first premolars, 65% in mandibular canines, and 56% in maxillary canines. The PR showed the lowest incidence of apical deltas for all dental groups when compared with AAE (p=0.004). Interestingly, distal canals in maxillary molars showed a significant discrepancy between classifications (p=0.027). Conclusions μCT enabled accurately describing the RC system and related ramifications, adding to the PR and AAE classifications, with some discrepancies reported for maxillary molars. Clinical Relevance This μCT study enabled a thorough description of the variability among root canals and their ramifications, including clinically relevant details on the presence and location of lateral canals and accessories in all human tooth groups, beyond the currently existing classification systems.

Limitation of diagnostic value of cone-beam CT in detecting apical root isthmuses

Abstract Isthmuses are reported as common anatomic complexities in teeth often associated with failures in endodontic treatment. They should be considered before starting treatment and a preoperative computed tomography scan (CT) may demonstrate these complexities. Objective To assess the diagnostic value of the highest resolution settings of a cone-beam CT (CBCT) system in identifying and measuring apical isthmuses, using micro-CT as reference. Methodology After micro-CT scanning, 40 humans' lower first molars with isthmuses in the apical-3 mm of mesial roots were scanned by the highest resolution settings of the New Generation i-Cat ® CBCT equipment. Two blinded observers recorded the detection of isthmuses in CBCT scans. The lengths of isthmuses were compared between micro-CT and CBCT to assess the diagnostic value of CBCT. Quantitative data for sensitivity were represented as percentages (95% confidence interval). The Bland-Altman method was used to assess differences between gold standard lengths (micro-CT) and CBCT lengths. Results BCT demonstrated 30 positive findings, representing sensitivity for isthmus identification of 75% (95% CI=0.4114-1.1364). Differences between the lengths in micro-CT (1.99±0.40 mm) and CBCT (1.53±0.41 mm) were significant (p<0.0001). Conclusion The CBCT device used presented limited diagnostic value in the identification and measurement of apical isthmuses in the mesial roots of lower molars. In some cases, the actual anatomy of the apical root canal may not be completely delineated in this type of CBCT system, even using the highest resolution settings.

Accuracy of Four Electronic Apex Locators During Root Canal Length Determination / Precisión de Cuatro Localizadores de Ápice en la Determinación de la Longitud de Trabajo

ABSTRACT: The apical limit of tooth roots for instrumentation and obturation is a controversial subject due to the high morphological complexity presented by the apical zone of the root. The development of electronic apex locators (EALs) has made working length (WL) determination more predictable, producing more accurate results; however, the interpretation mechanisms of different devices may affect measurements taken under different clinical conditions. One hundred premolars were used to compare the effectiveness of Propex II, Raypex 6, Propex Pixi and Root ZX II in locating the apical foramen (AF). No statistically significant differences were observed when the accuracy of measurement was compared between the different groups of EALs, however Root ZX II and Raypex 6 presented the best overall performance.

RESUMEN: El límite apical radicular para la instrumentación y obturación es un tema controversial, debido a la alta complejidad morfológica que presenta la zona apical de la raíz. El desarrollo de localizadores de ápice electrónicos (EALs) ha hecho la determinación de la longitud de trabajo (WL) más predecible y con resultados más precisos. Sin embargo, el mecanismo de interpretación de cada dispositivo puede afectar la determinación de las mediciones en diferentes condiciones clínicas. Cien premolares fueron utilizados para comparar la efectividad de Propex II, Raypex 6, Propex Pixi y Root ZX II en localizar el foramen apical (AF). No se observaron diferencias estadísticamente significativas cuando se comparó la precisión de medición entre los diferentes grupos de EALs, sin embargo, Root ZX II y Raypex 6 mostraron un mejor desempeño global.

Effect of Reciprocating Systems and Working Lengths on Apical Microcrack Development: a micro-CT Study

Abstract The objective of this study was to evaluate the effect of root canal preparation with single-file reciprocating systems at different working lengths on the development of apical microcracks using micro-computed tomographic (micro-CT) imaging. Forty extracted human mandibular incisors were randomly assigned to 4 groups (n=10) according to the systems and working length used to prepare the root canals: Group A - WaveOne Gold at apical foramen (AF), Group B - WaveOne Gold 1 mm short of the AF (AF-1 mm), Group C - Unicone (AF) and Group D - Unicone (AF-1 mm). Micro-CT scanning was performed before and after root canal preparation at an isotropic resolution of 14 µm. Then, three examiners assessed the cross-sectional images generated to detect microcracks in the apical portion of the roots. Apical microcracks were visualized in 3, 1, 1, and 3 specimens in groups A, B, C, and D, respectively. All these microcracks observed after root canal preparation already existed prior to instrumentation, and no new apical microcrack was detected. For all groups, the number of slices presenting microcracks after root canal preparation was the same as before canal preparation. Root canal preparation with WaveOne Gold and Unicone, regardless of the working length, was not associated with apical microcrack formation.

Resumo O objetivo deste estudo foi avaliar o efeito da instrumentação de canais radiculares utilizando sistemas reciprocantes de lima única em diferentes comprimentos de trabalho sobre o desenvolvimento de microfissuras apicais utilizando imagens de microtomografia computadorizada (micro-CT). Quarenta incisivos inferiores humanos extraídos foram distribuídos aleatoriamente em 4 grupos (n=10) de acordo com os sistemas e comprimentos de trabalho utilizados para preparar os canais radiculares: Grupo A - WaveOne Gold no forame apical (FA), Grupo B - WaveOne Gold 1 mm aquém do FA (FA-1 mm), Grupo C - Unicone (FA) e grupo D - Unicone (FA-1 mm). Escaneamentos de micro-CT foram realizados antes e após o preparo dos canais a uma resolução isotrópica de 14 μm. Em seguida, três examinadores avaliaram as imagens de secção transversal geradas para detectar microfissuras na porção apical das raízes. Microfissuras apicais foram visualizadas em 3, 1, 1 e 3 espécimes nos grupos A, B, C e D, respectivamente. Todas essas microfissuras observadas após o preparo dos canais radiculares já existiam antes da instrumentação e não foi detectada nenhuma nova microfissura apical. Para todos os grupos, o número de cortes apresentando microfissuras após o preparo dos canais radiculares foi o mesmo verificado antes do preparo dos canais. A instrumentação de canais radiculares utilizando WaveOne Gold e Unicone, independentemente do comprimento de trabalho, não foi associada à formação de microfissuras apicais.

An in vivo comparative evaluation to determine the accuracy of working length between radiographic and electronic apex locators.

Background: An in vivo comparative evaluation to determine the accuracy of working length between radiographic and electronic apex locators. Aim: The study was aimed at evaluating the accuracy of electronic apex locator, to determine the working length of root canal, and to compare it with the radiographic method of working length determination. Materials and Methods: A total of 20 teeth selected for the study had to go for extraction because of periodontal or orthodontic reasons. Access cavity was prepared and the clinical estimated working length (CEWL) was determined with 10-25 no. K-file. A radiograph was then taken for determining the radiographic estimated working length (REWL). For electronic measurement of root canal, a 10 no. K-file was advanced toward the apex until it reached a 0.5 mm short of apex as shown by the apex locator. After fixing the file with a light cured composite, the tooth was extracted, the tooth surface was then longitudinally grounded using straight fissure diamond bur until the root canal and the tip of the file were visible. The distance of file from the minor constriction was measured with help of stereomicroscope. Statistical analysis : The chi-square test was used for statistical analysis for this study. Results: The chi-square test where χ2 = 21.034 with P = 0.000 indicated that a significant difference exists among the groups. The electronic method showed highest number of cases with the working length at the minor constrictor. Conclusion: The electronic method for determining the working length of root canal was found to be more accurate than the radiographic method.

Radiographic versus electronic root canal working length determination.

Purpose: The aim of this ex vivo study was to compare the accuracy of radiographic and electronic root canal length determination methods, compared with actual root canal length obtained with stereomicroscope. Materials and Methods: Thirty extracted single-rooted permanent teeth were used for this study. After access preparation, actual length (AL) of the root canal were determined for each tooth by inserting a #15 file until the tip of the file was visible at the apical foramen under a stereomicroscope. The radiographic working length determination was determined with a digital radiographic system and for the electronic measurement all teeth were embedded in an alginate model to test apex locator in-vitro. Data was analyzed using the descriptive statistic and intraclass correlation coefficient. Results: No significant difference was found between the radiographic and electronic root canal working length determination (P>0.05). The percentage of electronic measurements within ±0.5 mm to the apical constriction was 93.34% and 90% for radiographic methods within ±0.5 mm of all cases compared with AL. Conclusions: The present ex vivo study showed that electronic root canal working length determination is not superior to radiographic methods. Both methods provided a good performance in determining the root canal working length.

Predicting the actual length of premolar teeth on the basis of panoramic radiology.

Background: Panoramic radiography is one of the most common techniques for evaluating the jaw bones and associated structures. Aim: The aim of the study was to predict the actual length of the premolar teeth, based on measurements taken on a panoramic radiograph. Materials and Methods: This study was done in two stages. In the first stage, the actual and panoramic lengths of 102 teeth of orthodontic patients were measured and compared. In the next stage, the actual and radiographic vertical lengths of four metal balls placed in the molar and first premolar areas of 27 patients, referred to radiography clinic were also analyzed. Comparison of the mean magnification between the two methods was performed by one-sample T-test and P<0.05 was considered as statistically significant. Results: The total magnification of the premolar region in the vertical plane in the tooth length measurement method was 17.39%, while the same in the metal markers method was 27.39%. The upper teeth showed larger magnification than the lower teeth in the vertical plane. Similarly, the magnification and distortion of the metal markers in the horizontal plane were significantly more than this in the vertical plane and also their magnification and distortion in the molar region were more than this in the premolar region. The actual length of the premolar teeth can be estimated by using a suitable regression formula. Conclusion: Panoramic radiography can be used for calculating the actual length of premolar teeth.

Study of the role of the cortical bone in the trabeculation pattern on periapical radiography of dry human mandibles

It is generally believed that the radiographic image of bone striae is a reflection of the trabecular pattern of cancellous bone. Results of a study by Calvacanti et al contradicted suggesting that intraoral radiographic image of trabecular pattern in the mandible reflects the morphology of the endosteal surface of the cortical bone rather than that of cancellous bone. The aim of this study was to test whether the cortical bone has an influence on trabeculation pattern on periapical radiographs made with the paralleling techniques of dry mandibles. Standard parallel periapical radiographs from 7 dry human mandibles made on the same regions from 15 areas prepared. The radiographs acquired before, after removal of buccal, then lingual plate together with endosteal cortical trabecular bone interface. We acquired 45 parallel periapical radiograph. Three maxillofacial radiologists assessed the presence or absence of bone striations on acquired images and whether a difference in trabeculation pattern exists. Answers were scored 0 [exist changes], 1 [no changes]. Data were analyzed by Chi square and Freedman statistical analysis. There was no difference in the pattern of bone striations on images of dry human mandibles in the absence of one or both cortical plates. Cancellous bone has an important role in trabeculation pattern. Removal of buccal and lingual cortical bone causes no change in trabecular pattern